Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
No customer reviews for the moment.
Part #: 1115449OIL
Replacement Oil Cap Billet "OIL"
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115452
This stock oil filler and cap has been chromed.
Application:Part #: JC21010
Jaycee Mag-Plate, 6 Bolt, Red
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: N138171
Oil pressure relief gasket
Application:Part #: 113115181A
This is the plate on the bottom of the motor.
Application:Part #: JC22270
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Blue
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115455
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
