Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. The Vertical design makes it easier to pour oil into your motor and also comes with a smooth or grooved cap. All are vented. Rubber gaskets in the cap and rubber o-rings for the base seal included. Black
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia (Type 4): 40hp-1600
Thing (Type 5): 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 021117151A
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 1117108ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1115110
These thermostats turn your electric fan on automatically.
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 1117101ALF
These fittings are used for the stainless steel hose.
Application:Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 1117110
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
