Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. The Vertical design makes it easier to pour oil into your motor and also comes with a smooth or grooved cap. All are vented. Rubber gaskets in the cap and rubber o-rings for the base seal included. Red
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia (Type 4): 40hp-1600
Thing (Type 5): 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 311115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115141BL
This oil pump cover comes with a threaded boss.
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 1115449BK
Replacement Oil Cap Billet Black
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:Part #: 1117111
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
