Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Replacement Oil Cap Billet Blue
Replacement Oil Cap Billet Blue
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 1115120
Melling Oil Pump for 8mm Studs with Flat Cam Gear
Application:Part #: 2117004
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115106A
This is a great way to increase the oil capacity of your engine.
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1117101ALM
These fittings are used for the stainless steel hose.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:
Replacement Oil Cap Billet Blue
