Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This Billet adapter is used to mount an oil filter either by itself or in line with an oil cooler.
This Billet adapter is used to mount an oil filter either by itself or in line with an oil cooler. On bugs we usually mount them in the driver's side fender well, just under the tail light wires. See 1117011 for a slick mount for bugs.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115449OIL
Replacement Oil Cap Billet "OIL"
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 6115468E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1115141BL
This oil pump cover comes with a threaded boss.
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 6115467B
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 021117151A
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 1129614F
This fitting can be used when routing your breather hose into your air cleaner.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: JC21030
Jaycee Mag-Plate, 6 Bolt, Blue
Application:Part #: N138171
Oil pressure relief gasket
Application:
This Billet adapter is used to mount an oil filter either by itself or in line with an oil cooler.
