Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Cool tins are must for those of you with high performance exhaust systems without heater boxes. They will fit most big bore kits. Unfortunately the fit is poor. Sold in pairs.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Off-Road: 1600
No customer reviews for the moment.
Part #: 1119526BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: N107101BSS
6mm Allen Head Tin Screws Stainless Steel
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 043119352
Heater Channel Tin Lower Right
Application:Part #: 1119525CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
