Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins. The doghouse tin has a hole in the back of it for the ducting tin to fit into. This is used in conjunction with the other doghouse tins, and fan shroud.
Bug (Type 1): 1600
Bus (Type 2): 1600
Ghia: 1600
Thing: 1600
No customer reviews for the moment.
Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 1119525CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119100
These plugs fit into the fan shroud, plugging off the heater ducts.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1119525BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
