Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This tin goes from one piece of cylinder tin to the other.
This tin goes from one piece of cylinder tin to the other. It mates up with the tin that is behind the crank pulley. They make two styles of crank pulley tin, so it's very important that you use the early, short style tin with one of these. The fit is poor.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
No customer reviews for the moment.
Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:Part #: 043119351B
Heater Channel Tin Left
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119025BKS
Super Shroud, Dog house oil cooler style, with heater ducts, black
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119302BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 1119431BK
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:
This tin goes from one piece of cylinder tin to the other.
