Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This tin goes from one piece of cylinder tin to the other.
This tin goes from one piece of cylinder tin to the other. It mates up with the tin that is behind the crank pulley. They make two styles of crank pulley tin, so it's very important that you use the early, short style tin with one of these. The fit is poor.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
No customer reviews for the moment.
Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1119516BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119100
These plugs fit into the fan shroud, plugging off the heater ducts.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119528BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119431BK
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119517CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:
This tin goes from one piece of cylinder tin to the other.
