Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This fan shroud is small in size allowing more room around other parts of the engine.
This fan shroud is small in size allowing more room around other parts of the engine. You can't a cooler in this shroud so we only use them on tube-style cars that have big external coolers.
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 6119025CH
This screen attaches to the fan shroud keeping the big stuff out.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 6105251
If you are prone to stick your finger where they don't belong or have kids that do, it's a good idea to put a guard around the belt..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 6119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 6105250
If you are prone to stick your finger where they don't belong or have kids that do, it's a good idea to put a guard around the belt..
Application:Part #: 043119351B
Heater Channel Tin Left
Application:
This fan shroud is small in size allowing more room around other parts of the engine.
