Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These shields help protect your pushrod tubes.
These shields help protect your pushrod tubes. They bolt directly to your exhaust ports, but only work if you're not running heater boxes. It's a good idea to use these if your not running a skid plate.
Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 6119027
This fan shroud is small in size allowing more room around other parts of the engine.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:Part #: 1119302BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 043119351B
Heater Channel Tin Left
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: N107101BSS
6mm Allen Head Tin Screws Stainless Steel
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: 1117323
Hoover Bit
Application:Bug (Type 1); 1600
Bus (Type 2); 1600
KG; 1600
Thing; 1600
Offroad/race car; 1600