Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal goes around the mainshaft.
This seal goes around the mainshaft. Getting the old seal out is tough, but if you have a seal puller, it makes the job a lot easier. Use a one ft. long piece of 1 1/2" pipe and drive the seal in straight.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 001301209C
Nose Cone Seal Holder
Application:Part #: 113301185A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 1301050
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 1301185
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 1301048
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 211301215
This is the front of the transmission that houses the shift lever.
Application:Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 311301265BFA
Transmission mount, Front
Application:Part #: 111301289
Nose Cone Boot
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 311301265B
These rubber mounts hold the transmission in place.
Application:
This seal goes around the mainshaft.
