Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. We prefer the Cima Mahle brand for the 1200-1600cc engines. We do not like the wire type of wrist pin keepers and suggest you buy a set of Tru-Arc type keepers. When you get pistons and cylinders, the pistons need to be taken out of the cylinders and have the cosmoline cleaned off and the ring gaps set. Note: The arrows on the pistons go towards the flywheel. If you want your motor to last, I suggest you flip ahead and read BARREL SHIMS.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing (Type 5): 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1109512
Valve seats are used in the big valve heads.
Application:Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101477
These covers look good but have a tendency to leak.
Application:Part #: 1101482
These covers look good but have a tendency to leak.
Application:Part #: 1101469
If you have high compression you will need to vent the valve covers into a breather box. Deluxe Vents have barbed end for the hose connection.
Application:Part #: 1198090ACH
90.5mm Pistons & Cylinders - 69mm Stroke CHINA
Application:Part #: 1198162
These rings are cast iron.
Application:Part #: 1101391
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101355
Here's another long subject, but it'll give you a little something to think about.
Application:Part #: 111198057
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1101396
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101475B
These are good bolt on valve covers. Black in Color
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 111109623
25/36 HP Valve Springs (Set of 8)
Application:Part #: 1101473OR
These covers look good but have a tendency to leak.
Part #: 111101401B
If you're rebuilding your own heads, you will probably need guides.
Application:
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED