Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Aluminum Stock Crankshaft Pulley Red
Aluminum Stock Crankshaft Pulley Red
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1105401B
These connecting rods are longer than stock.
Application:Part #: 111105285
Flywheel Shim 25-36HP, .32mm (0.0125")
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 111903221S
Replacement Bearings for Serpentine System
Application:Part #: 311105273ACO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105281
Flywheel Shim 25-36HP, .24mm (0.01")
Application:Part #: 1105425
These connecting rods are longer than stock.
Application:Part #: 1105182
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
Application:Part #: 1105253BL
This is a crank pulley for an upright motor.
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 111105701A
These are the shells that go in the rods and ride on the crank.
Application:Part #: 111105401CO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 111198511OS2
Main Bearing Set 1200-1600
Application:Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:
Aluminum Stock Crankshaft Pulley Red
