Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This little box tells the generator what to do.
This little box tells the generator what to do. To test the regulator, use a volt meter on the battery. The voltage should read 12v to 12.5v. Now start the car and rev up the motor and read the meter. The meter should now read 13.5v to 14v. If the meter doesn't move, either the regulator or the generator is bad. If you see the volt meter go backwards then the generator needs to be polarized.
Bug (Type 1): 67-73
Bus (Type 2): 67
Type 3: 67-
Ghia: 67-73
Race/Off-Road: 67-73
No customer reviews for the moment.
Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: 1903109BIL
Billet Aluminum Pulley - 12 volt alt/gen
Application:Part #: 111903515A
These are the bearings and brushes for your generator.
Application:Part #: GR11XCO
Generators supply the battery with voltage.
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: 043903109GR
This is the pulley on the generator that holds the belt.
Application:Part #: 30049
This little box tells the alternator what to do. This is a german one but is not Bosch
Application:Part #: JC86020
Jaycee Billet Alternator Pulley, Red
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: 043903109BR
This is the pulley on the generator that holds the belt.
Application:Part #: 111903137E
This is the belt that turns the generator.
Application:Part #: 042903109ABR
This is the pulley on the generator that holds the belt.
Application:Part #: GR11X
Generators supply the battery with voltage.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 1301104
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: JC86000
Jaycee Billet Alternator Pulley, Blue
Application:
This little box tells the generator what to do.
