Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Probably the most common cause of generator pulleys coming apart is the shortage of shims. It is very important that you have a total of eight shims. Whatever shims you don't use between the pulley halves, you need to use under the bell. If you don't, you're going to have problems. The belt can fall down between the pulley halves and appear tight but in fact there may not be enough pulley shims to tighten against. Therefore it can't tighten up and it will fly apart then you will have to buy another generator. Read GENERATOR PULLEY for more instructions. Sold each
Bug (Type 1): All
Bus (Type 2): -1971
Type 3: All
Ghia: All
Thing: All
Race/Offroad: All
No customer reviews for the moment.
Part #: 1903109RD
Billet Alt/Gen Pulley Red
Application:Part #: 111903515A
These are the bearings and brushes for your generator.
Application:Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 30019
This little box tells the generator what to do.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: GR15NC
Generators supply the battery with voltage.
Application:Part #: 113971901A
This boot goes over the wire and the terminal of the generator or alternator.
Application:Part #: 1903109BOPO
Billet Pulley Outer Half Polished
Application:Part #: 111903137D
This is the belt that turns the generator.
Application:Part #: AL82NCH
This unit supplies the battery with voltage.
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 1903109POL
Polished Billet Alternator/Generator Pulley Kit
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:Part #: JC86000
Jaycee Billet Alternator Pulley, Blue
Application:Part #: SR15HT
This is what starts the car.
Application:
Probably the most common cause of generator pulleys coming apart is the shortage of shims.