Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need. Always use teflon tape on your fittings. Whatever you do, don't "muscle" them in, especially the 90 degree fitting on the case. We like to use quick fittings by the oil pump and case. If you use quick fittings, you won't have to cut hoses when you pull the engine.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: JC22250
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Red
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:Part #: N138171
Oil pressure relief gasket
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: 1115449RD
Replacement Oil Cap Billet Red
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
