Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is stainless steel braided fuel line.
This is stainless steel braided fuel line. We do not recommend this line unless you are using the screw in fittings everywhere. Don't use clamps because they're too loose and might come off. The hose size is 6AN.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1129611EL
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 113127025D
These stock pumps pump fuel into the carburetor.
Application:Part #: 111127141
Fuel Pump Diaphragm 25-36 HP
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1127022
This block off is used in conjunction with electric fuel pumps and mounts in place of the manual fuel pump.
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: VCP25
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 113129717LRG
Dual Port Gaskets without Pin Holes
Application:Part #: 61316
These stock pumps pump fuel into the carburetor.
Application:Part #: 1127022BL
Billet Fuel Pump Block off, Blue
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 1127104ALM
This is stainless steel braided fuel line.
Application:Part #: 1127022RD
Billet Fuel Pump Block off, Red
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:
This is stainless steel braided fuel line.