Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
This block off plate is made to loop the oil back into the case in place of the stock oil cooler. You will have to contrive a new method of cooling the oil using a big external cooler with a big fan on it. We do not recommend this product unless this is a drag car.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: JC22220
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Black
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115182
A stock sump plate that has been chromed..
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 1117101ALF
These fittings are used for the stainless steel hose.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 1117104
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117008
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
