Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need. Always use teflon tape on your fittings. Whatever you do, don't "muscle" them in, especially the 90 degree fitting on the case. We like to use quick fittings by the oil pump and case. If you use quick fittings, you won't have to cut hoses when you pull the engine.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: JC22950
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Black
Application:Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:Part #: 1115431
This hex drive replacement plug is for the case relief spring(s).
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1117105ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:Part #: 1119031
Replacement fan
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: 1115610BK
Billet Dipstick, Black
Application:Part #: 043115531A
Oil Filler with Cap
Application:Part #: 111115111B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
