Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
This adapter is used to mount an oil filter either by itself or in line with an oil cooler. On bugs we usually mount them in the driver's side fender well, just under the tail light wires. See 1117011 for a slick mount for bugs.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 1117101ALM
These fittings are used for the stainless steel hose.
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: N121051
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
