Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the same as the mesa cooler but with a fan mounted to it.
This is the same as the mesa cooler but with a fan mounted to it. You can get this in a 72 plate cooler or a 96 plate cooler. Keep in mind, due to the fan, you will need a little more space when mounting. Make sure you leave an air gap between the cooler and any flat surface. See FAN THERMOSTATS for automatic switching of the fan.
No customer reviews for the moment.
Part #: 1115431
This hex drive replacement plug is for the case relief spring(s).
Application:Part #: 1117008
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115610
Chrome dipsticks come in different lengths and styles..
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115467
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: JC22250
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Red
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115452
This stock oil filler and cap has been chromed.
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:
This is the same as the mesa cooler but with a fan mounted to it.