Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. The Vertical design makes it easier to pour oil into your motor and also comes with a smooth or grooved cap. All are vented. Rubber gaskets in the cap and rubber o-rings for the base seal included. Blue
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia (Type 4): 40hp-1600
Thing (Type 5): 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1115351
This is the last oil filter you will ever buy.
Application:Part #: 1117008
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1115183
This plate is made out of a solid piece of aluminum.
Application:Part #: 1117111
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 111115175
Oil Screen 25HP engines thru 1 677 687
Application:Part #: 111115107BHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115452
This stock oil filler and cap has been chromed.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117024
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: JC21010
Jaycee Mag-Plate, 6 Bolt, Red
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
