Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Whether your motor lives or not can depend upon this little shim.
Whether your motor lives or not can depend upon this little shim. Many people tend to overlook this part, but the shim controls the compression ratio. Compression equals heat and heat destroys motors. Take the time to figure your compression ratio and get the proper shims for that desired compression. Figuring compression ratios and getting the right shims is a long subject, so for help, just call or go to our tips and find the article I wrote on it. We find that 99.9% of all engines need barrel shims. Shims are sold in sets of 4.
No customer reviews for the moment.
Part #: 311198069F
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:Part #: 1101440
This is a shim that is used between the head and barrel.
Application:Part #: 111101481
This gasket goes between the valve cover and the head.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 1101384
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101474
These covers look good but have a tendency to leak.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 111198057A
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 311198069FM
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE
Application:Part #: N154011
These nuts and washers hold the heads on.
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 111101461
These nuts and washers hold the heads on.
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:
Whether your motor lives or not can depend upon this little shim.
