Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a shim that is used between the head and barrel.
This is a shim that is used between the head and barrel. We suggest you only run these on a friday saturday night car. We feel if you plan on putting a lot of miles on your motor the expansion characteristics will cause the heads to come loose after many miles. Now for drag cars and the friday saturday night car they are great. Make sure you take in consideration the thickness for your compression ratio.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1101476
These are great valve covers.
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 111198157BBB
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198163
These rings are cast iron.
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 1101355
Here's another long subject, but it'll give you a little something to think about.
Application:Part #: 1198090BCH
90.5mm Pistons & Cylinders - 82mm Stroke CHINA
Application:Part #: 1198163A
These rings are cast iron.
Application:Part #: 1101354
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 311198069MF
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:
This is a shim that is used between the head and barrel.
