Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These rings are cast iron.
These rings are cast iron. We prefer them over the chrome rings that come in the above big bore kits. It's true that with chrome rings your barrels won't wear as much, but that's because they never seat. We suggest you take the rings off the piston and give them to your girlfriend for bracelets. They're a cheap gift and she won't be around much longer anyway if you don't stop spending so much time on your motor. Be careful putting the rings on, as they can break. Always use spreader pliers. They are sold in sets.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 1101352
.
Application:Part #: 1107435
Not our favorite type of piston pin keeps.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:Part #: 1198094BCH
94mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:Part #: 1101381
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198090ACH
90.5mm Pistons & Cylinders - 69mm Stroke CHINA
Application:Part #: 1101474
These covers look good but have a tendency to leak.
Application:Part #: 1101346
36 HP Barrel Shims .060 (4)
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:
These rings are cast iron.
