Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
This piece of tin goes behind the engine towards the flywheel and screws down to the cylinder tins. The doghouse tin has a hole in the back of it for the ducting tin to fit into. This is used in conjunction with the other doghouse tins, and fan shroud.
No customer reviews for the moment.
Part #: 1119431BK
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119100
These plugs fit into the fan shroud, plugging off the heater ducts.
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: 1119526BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 131119357
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119302BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
