Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These three pieces of tin go from the heater boxes to the case.
These three pieces of tin go from the heater boxes to the case. Yes, they are important if you are running heater boxes, so don't leave them off. Unfortunately the fit is poor.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing: 1500-1600
Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 043119352
Heater Channel Tin Lower Right
Application:Part #: 1119028CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119431BK
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119516BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: N107101BSS
6mm Allen Head Tin Screws Stainless Steel
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:
These three pieces of tin go from the heater boxes to the case.
