Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These cylinder head tins sit under the fan shroud.
These cylinder head tins sit under the fan shroud. They're not great, but they'll work with some custom fitting. Sold in pairs.
Race/Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1119025BKS
Super Shroud, Dog house oil cooler style, with heater ducts, black
Application:Part #: 1117323
Hoover Bit
Application:Bug (Type 1); 1600
Bus (Type 2); 1600
KG; 1600
Thing; 1600
Offroad/race car; 1600
Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 6119025CH
This screen attaches to the fan shroud keeping the big stuff out.
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:
These cylinder head tins sit under the fan shroud.
