Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal keeps the fluid in the converter.
This seal keeps the fluid in the converter. You will need to have the converter out to change the seal. Just pry out the seal. Be careful to drive the seal in straight when installing it.
Bug (Type 1): 68-70
Ghia: 68-70
No customer reviews for the moment.
Part #: 113311113A
This seal goes around the mainshaft.
Application:Part #: 001301207
Nose Cone Bushing, Rear, Late
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: N122391
Transmission Cradle Bolt Washer
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 113301211G
This is the front of the transmission that houses the shift lever.
Application:Part #: 311301265B
These rubber mounts hold the transmission in place.
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 211301265AFA
Transmission mount, front, mid
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:Part #: 111301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:
This seal keeps the fluid in the converter.