Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts. The straps that we carry are rubber insulated, which allow slight movement in the transmission in order to keep mounts and horns from breaking.
Bug (Type 1): 58-79
Type 3: 64-68
Ghia: 58-74
Thing: 73-74
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 113301263
These rubber mounts hold the transmission in place.
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 311301265BFA
Transmission mount, Front
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 311301343
Sleeve
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 113301265E
These rubber mounts hold the transmission in place.
Application:Part #: 1311321
These heavy duty gear keys are rated at twice the strength of stock keys.
Application:Part #: 113713145A
The points that are in the shifter that disengage the transmission..
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application: