Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This bracket is part of the torsion housing.
This bracket is part of the torsion housing. Your front transmission mount bolts to it. Those of you with a 1960 Bug will want to get this bracket so you can get a decent mount on you car. Welding is required.
Bug (Type 1): 61-72
Ghia: 61-72
Race/Off-Road: 61-72
No customer reviews for the moment.
Part #: 211301297
Front Transmission Mount
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 1301048
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 1301185
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 001301207
Nose Cone Bushing, Rear, Late
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 001301083
This seal keeps the fluid in the converter.
Application:Part #: 001301209
Nose Cone Bushing, Front, Late
Application:Part #: 311301265BFA
Transmission mount, Front
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application: