Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen.
Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen. All shafts are ground from new billet castings and many sizes and profiles are available. The cams listed below are designed for use with stock ratio rockers. Note: Always check for lifter boss clearance. We have many years of experience with performance Bug engines, so please call for advice when choosing a cam. Never use any of these cams with stock carburetion. Engle cams do not come with a gear or bolts. We carry more Engle cams then what is listed here so if you don't see what you are looking call.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 113109641B
These springs return the valves back to their seats.
Application:Part #: 1109611
Stainless steel valves are used in the big valve heads.
Application:Part #: 111109301A
These rods link the cam to the valves.
Application:Part #: 1109305
Aluminum Smith Bros. Push Rods
Application:Part #: 11310140102
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1109430
These shims are used under the rockers to set the geometry.
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 113109612A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 1109002
Premium Performance Aftermarket Cam Gear
Application:Part #: 1109405
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 111109345
Push Rod tube seal for 36 HP
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 311109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 1109337
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: JC91030
Jaycee Leak proof Pushrod Tubes, Blue
Application: