Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These shims are used with the Solid Shaft Rocker Kit.
These shims are used with the Solid Shaft Rocker Kit. Even though the rocker kit comes with shims, you many need more. When you run solid shafts, it's very important they are shimmed correctly.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1109403
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 1109010
Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen.
Application:Part #: 1109400
This kit eliminates the clips and spring washers in a rocker shaft set up.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1109401125SC
1.25 Ratio Rockers Pro SCAT
Application:Part #: 11094011
Rocker Arms Kit, HP Stock 1.1
Application:Part #: 043109611A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1109430
These shims are used under the rockers to set the geometry.
Application:Part #: 113109651A
These springs return the valves back to their seats.
Application:Part #: 1109305
Aluminum Smith Bros. Push Rods
Application:Part #: 111109601A
Intake Valve 30mm (each)
Application:Part #: 113109021GBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 1109339
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1109611
Stainless steel valves are used in the big valve heads.
Application:
These shims are used with the Solid Shaft Rocker Kit.