Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off. These are better than the nylon push rod tubes, but we find they still leak a little. The stock push rod tubes are the best.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 113109641B
These springs return the valves back to their seats.
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 1109642
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 1109305
Aluminum Smith Bros. Push Rods
Application:Part #: 111109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1109337
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: 1109009
We have had good luck with this cam and prefer it over new stock cams and is a great cam when you want to stay with the stock carburetor or Kadrons.
Application:Part #: 1109410
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 113109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 111109325
Push Rod Guide, 25-36 HP, Each
Application:Part #: 1109613
Stainless steel valves are used in the big valve heads.
Application:Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: JC91000
Rebuild kit for Jaycee Leak proof Pushrod Tubes
Application:Part #: 1109399
1.25 Ratio Rockers ONLY
Application:Part #: 1109335
These stock-style tubes are made of stainless steel.
Application:
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
