Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This gasket is only used if you're having problems with your end play.
This gasket is only used if you're having problems with your end play. Lets say you have three .010" flywheel shims and when you torque the flywheel the motor locks up. You'd use this gasket to give you more endplay.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 113105401ARC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 1105273CH
Lightened 12 lb.
Application:Part #: 1105278
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105182
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 111105235A
These are the shims that set the endplay of the distributor drive gear.
Application:Part #: 111105209
CRANKSHAFT GEAR, timing, 36hp engines
Application:Part #: 1105297
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 113105277
These pins hold the flywheel in place on the crankshaft.
Application:Part #: 111105223
This brass gear goes on the crank to turn the distributor drive shaft.
Application:Part #: 111105401RC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: 1105257
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:
This gasket is only used if you're having problems with your end play.
