Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This key holds the oil deflector in place as well as aligns the front pulley.
This key holds the oil deflector in place as well as aligns the front pulley. Note: Put it on before you install the crank into the case, again using a brass drift and making sure it is flat.
Bug (Type 1): 46-79
Bus (Type 2): 50-71
Type 3: 62-73
Ghia: 56-74
Thing: 73-74
Race/Off-Road: 46-79
No customer reviews for the moment.
Part #: 1105251ALBL
Aluminum Stock Crankshaft Pulley Blue
Application:Part #: 113105219
Crankshaft Spacer Ring
Application:Part #: 311105273ARC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 1105251ALRD
Aluminum Stock Crankshaft Pulley Red
Application:Part #: 111105701A
These are the shells that go in the rods and ride on the crank.
Application:Part #: 311105431A
Wrist Pin Bushing.
Application:Bug (Type 1); 1300-1600
Bus (Type 2); 1300-1600
Type 3; 1300-1600
KG; 1300-1600
Thing: 1300-1600
Offroad/Race; 1300-1600
Part #: 1105174
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
Application:Part #: 111105271RC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 113105245FS
This seal goes behind the flywheel.
Application:Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105253BL
This is a crank pulley for an upright motor.
Application:Part #: 1105305
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:
This key holds the oil deflector in place as well as aligns the front pulley.
