Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This collar goes around the gas tank neck on buses 1955-1967.
This collar goes around the gas tank neck on buses 1955-1967. The tank needs to be removed in order to install this collar. Note: Put some dish soap on the neck of the tank. This will help when pressing it into the new collar.
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 211201551GR
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
Application:Part #: 133133511
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 211201557A
Cork Gas Cap Gasket, fits 60mm fuel caps
Application:Part #: 311971907
Turn Signal Switch Grommet for Type 1, fuel pump and backup harness grommet on late Type 2, and main harness through body early Type 2
Application:Part #: 211201055B
These are new Brazilian tanks.
Application:Part #: 211201075L
Fuel Tank For Carbureted Applications only. At this point in time we can not get this tank and we are using the 211201075M fuel injection take and just plugging off the return line.
Application:Part #: 211201125
Fuel Tank Filler Hose
Application:Part #: 251919051E
The sending unit registers the fuel level on the gauge.
Application:Part #: 261827600
Gas Door Hardware Kit
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:Part #: 211201075M
Fuel Tank. This tank can be used with non fuel injected busses, you just need to plug the injection return line.
Application:Part #: 211201557E
Gas Cap Gasket, 70mm
Application:Part #: 211209021D
This pipe comes out of the bottom of your gas tank.
Application:Part #: 211201521A
Truck Hard Fuel line Tank to Motor
Application:Part #: 131298221
This pipe comes out of the bottom of your gas tank.
Application:
This collar goes around the gas tank neck on buses 1955-1967.