Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
We usally find these fittings all taped or glued up.
We usally find these fittings all taped or glued up. If yours fit this description please replace them. It will make the motor run better and cooler.
Bus (Type 2): 72-74
No customer reviews for the moment.
Part #: 1127109
This is a brass tee for dual carbs.
Application:Part #: 1129809K
Kadron Air Cleaner Base Gasket (Pair)
Application:Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 021127303A
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 111127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1127022BK
Billet Fuel Pump Block off, Black
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1129601HD
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 111127531A
6mm Fuel Line Ferrule
Application:Part #: 111127591A
Fuel Line Grommet 8mm
Application:Part #: VCP18
This is a rubber plug that is used to plug off vacuum.
Application:
We usally find these fittings all taped or glued up.
