Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
The oil pump is the heart of the engine, so it is very important to choose the right one. When ordering a pump you will need to know if your case is a single or dual relief, if you have a dished or a flat cam and if you want a standard or heavy duty pump. Remember that you can only pump so much oil through a certain size hole, so be careful in ordering a heavy duty pump. We feel that any pump with gears larger than 30mm is a waste of money. Note: When replacing a pump make sure you use four new sealing nuts.
Bug (Type 1): 68-79
Bus (Type 2): 68-71
Vanagon: 83-91
Type 3: 68-73
Ghia: 68-74
Thing: 73-74
Race/Off-Road: 68-79
No customer reviews for the moment.
Part #: 040101149
Oil pick up Pipe
Application:Part #: 1117008
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117102ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115610BL
Billet Dipstick, Blue
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.