Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 6115468E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1115449SM
Replacement Oil Cap Billet Smooth
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 6115453
This stock oil filler and cap has been chromed.
Application:Part #: 61151062
Engine Oil Accumulator 2 QT capacity
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 6115467B
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1117013
Inward Facing Exhaust Oil Filter Mount
Application:
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
