Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
To use this cooler adapter, replace it for the spin-on oil filter and then hook up your remote oil cooler and filter connections..
To use this cooler adapter, replace it for the spin-on oil filter and then hook up your remote oil cooler and filter connections.
Bus (Type 2): 1700-2000
No customer reviews for the moment.
Part #: N297012
Oil Drain Plug
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: JC22240
Jaycee Billet Oil Cap with Breater -8 AN Fitting, Silver
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application:Part #: 1115141BL
This oil pump cover comes with a threaded boss.
Application:Part #: 111115107AK
VW flat cam, 21mm, 8mm Stud Oil Pump
Application:Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117024
Mesa coolers are the state of the art oil coolers.
Application:
To use this cooler adapter, replace it for the spin-on oil filter and then hook up your remote oil cooler and filter connections..
