Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These gaskets are used on the sump plates of the engine.
These gaskets are used on the sump plates of the engine. Note: We use a sealer called Gasgacinch on these gaskets. You should use cap nuts on the studs and DO NOT over tighten them.
Bus (Type 2): 72-79
Vanagon: 80-83
No customer reviews for the moment.
Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: N297012
Oil Drain Plug
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 021115411a
Oil Pressure Relief Piston
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 021115175
This screen fits in the sump around the pick up tube.
Application:Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: JC22220
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Black
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 1115455
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 021101269A
Oil Sump Lid O-Ring
Application:
These gaskets are used on the sump plates of the engine.
