Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This stock oil cooler cools the hot oil coming from the engine.
This stock oil cooler cools the hot oil coming from the engine. We recommend the doghouse style over the earlier one because the hot air exits the cooler and goes outside the engine compartment. The earlier cooler allows the hot air to go over the #3&4 cylinders, an inadequate way of cooling. Note: When installing the fan shroud over the doghouse cooler you should wrap a piece of foam over the top of the cooler to insure that air from the fan goes through the cooler and not around it. When it comes to oil cooler seals, we suggest you give us a call.
Bus (Type 2): 72-79
Vanagon: 80-83
No customer reviews for the moment.
Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1119031
Replacement fan
Application:Part #: 021115175
This screen fits in the sump around the pick up tube.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:
This stock oil cooler cools the hot oil coming from the engine.
