Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This oil pump cover comes with a threaded boss.
This oil pump cover comes with a threaded boss. You will need to plug the outlet side of the oil pump, which will force the oil out the cover. From this cover, the oil is routed to a filter then to a cooler and back into the case. The case must be full flowed, in other words, machined for the return line. This is the optimal way to run an external cooler, while maintaining the stock cooler. We recommend using this cover with a System One oil filter and the Mesa 72 plate oil cooler. You should also use the stock 1971 on doghouse internal oil cooler. All covers are for 8mm studed oil pumps.
Bug (Type 1): All
Bus (Type 2): -67
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: 2117004
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1115610BK
Billet Dipstick, Black
Application:Part #: 1115106
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115182
A stock sump plate that has been chromed..
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1115105E
Oil Pick Up Tube Cut To Length
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:
This oil pump cover comes with a threaded boss.
