Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the best breather system for off-road cars.
This is the best breather system for off-road cars. We mount it above the engine. Run a hose from one valve cover into the side and another from the other valve cover into the bottom. The third hose runs from the oil filler into the side. That way when the motor is not running, the oil that gets up in the filter will drain back down into the engine.
Race/Off-Road: All
No customer reviews for the moment.
Part #: N110623
Some of the more common nuts you might need..
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1115449RD
Replacement Oil Cap Billet Red
Application:Part #: 311115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:Part #: 6115468
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1115351BUL
This is the last oil filter you will ever buy.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 61151062
Engine Oil Accumulator 2 QT capacity
Application:Part #: 1117106
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115183
This plate is made out of a solid piece of aluminum.
Application:
This is the best breather system for off-road cars.
