Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
It caps the hole you are aiming at while pouring oil over everything else.
It caps the hole you are aiming at while pouring oil over everything else. Used ones are fine as long as the gasket is good.
Bug (Type 1): 56-74
Bus (Type 2): 56-71
Ghia: 56-74
Thing: 73-74
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 1117111
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: JC22270
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Blue
Application:Part #: JC21030
Jaycee Mag-Plate, 6 Bolt, Blue
Application:Part #: 1117110
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1117108ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:
It caps the hole you are aiming at while pouring oil over everything else.
