Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
All kits come with pistons, cylinders, rings, wrist pins and clips.
All kits come with pistons, cylinders, rings, wrist pins and clips. Many of the kits will require machine work to the heads and case. Before you buy a kit, you should have a good understanding of how to set the compression ratio. Many people think that bigger motors are unreliable. This is just not true. When a motor is properly designed and built, it can be very dependable. You will not realize the full potential of the bigger pistons, unless you run big valve heads. There is a lot of information needed, so call us and we will gladly help. Note: The only thing we don't like about these kits are the rings and the wrist pin clips.
No customer reviews for the moment.
Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 1198090A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 111101481
This gasket goes between the valve cover and the head.
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 113101353ERB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 311198069FM
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE
Application:Part #: 1101481
These are great valve covers gaskets.
Application:Part #: 1101342
36 HP Barrel Shims .020 (4)
Application:Part #: 1101355
Here's another long subject, but it'll give you a little something to think about.
Application:Part #: 11310140102
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101351
Whether your motor lives or not can depend upon this little shim.
Application:Part #: N154011
These nuts and washers hold the heads on.
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:
All kits come with pistons, cylinders, rings, wrist pins and clips.
