Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These rings are cast iron.
These rings are cast iron. We prefer them over the chrome rings that come in the above big bore kits. It's true that with chrome rings your barrels won't wear as much, but that's because they never seat. We suggest you take the rings off the piston and give them to your girlfriend for bracelets. They're a cheap gift and she won't be around much longer anyway if you don't stop spending so much time on your motor. Be careful putting the rings on, as they can break. Always use spreader pliers. They are sold in sets.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1198090BCH
90.5mm Pistons & Cylinders - 82mm Stroke CHINA
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 1198092ACH
92mm Pistons & Cylinders set with a 69mm Stroke CHINA
Application:Part #: 1107435
Not our favorite type of piston pin keeps.
Application:Part #: 1109512
Valve seats are used in the big valve heads.
Application:Part #: 1101399
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198092B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: 1198161A
These rings are cast iron.
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 1101446
This is a shim that is used between the head and barrel.
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 311198069F
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1198092BCH
92mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:
These rings are cast iron.
