Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Whether your motor lives or not can depend upon this little shim.
Whether your motor lives or not can depend upon this little shim. Many people tend to overlook this part, but the shim controls the compression ratio. Compression equals heat and heat destroys motors. Take the time to figure your compression ratio and get the proper shims for that desired compression. Figuring compression ratios and getting the right shims is a long subject, so for help, just call. We find that 99.9% of all engines need barrel shims. Shims are sold in sets of 4.
Bug (Type 1): 1600
Ghia: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1101473OR
These covers look good but have a tendency to leak.
Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1198090B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 11310140102
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1101372
40 HP Barrel Shims .020 (4)
Application:Part #: 1101394
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198090BCH
90.5mm Pistons & Cylinders - 82mm Stroke CHINA
Application:Part #: N154011
These nuts and washers hold the heads on.
Application:Part #: 1101441
This is a shim that is used between the head and barrel.
Application:Part #: 043101421
Exhaust Valve Guide 9mm
Application:Part #: 1198162TS
92mm Piston Rings 1.5x2x4 Total Seal
Application:Part #: 111101481
This gasket goes between the valve cover and the head.
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:
Whether your motor lives or not can depend upon this little shim.
